Aircel For Unlimited 3G

Here is a simple procedure to get aircel 3g for unlimited data download with high speed, just follow this steps and enjoy unlimited 3g on hand set or data card.

Step1: Recharge new Smart PI 128(for 1 month) or Smart PI 17(for 3 days).However you can activate this plan from main account balance using USSDs *122*128# or *122*17#.

The 128 plan basically gives 500MB data for high speed 3g and after that you can download with a speed limit 128Kbps.

Here Kbps stands for Kilo Bit Per Second which is exactly 8 times lesser than KBPS(Kilo Byte Per Second). Hance speed will be arround 32KBPS.

And same condition is with 17 plan except the high speed data is 100MB and vailidity is 3days.
But, no doubt you will get High speed Unlimited 3g by this trick.

Step2:If 3g  is not activated on your number then activate it by senndig a message START 3G at 121.
Now use 3g high speed data given on this pack.After that, when given data finishes, select your network setting in the USB data card or Handset and change the mode from 3G(UMTS or HSDPA or WCDMA) to 2G (EDGE).
Then
in case of USB data card disconnect internet connection.
and in case of Mobile handset Skip next step.

Step 3: Now go to your Network and Sharing Center icon (see in  figure if you are using windows 7,the icon with yellow warning symbol) and click it.

Then find out your existing connection name, however in the figure it is all ready connected to a wireless network.If you are unable to identify your connection name then go to your USB network setting and find your APN name.

Now click on your existing APN name is Aircel Internet in case of mine.

Now click on connect (see next image) and close this,

Step4:Go to your browser and open any page and wait a while.

Open your data card's (handaset's)network setting and change the network mode to UMTS or 3G or WCDMA.

Now enjoy unlimited 3g data with high speed..

Thanks for reading this blog.

please comment if you are getting any problem .